Name:
IR3UII-R0
Source1:
Symbol:
Latest symbol  Antenna
Latest Packet:
Status Packet
Receive Time:
Age:
Path2:
APBM1S via TCPIP*,qAS,BM2222
Device3:
Unknown
Latest Comment:
BM2222 - Ripetitore di Tarcento, (UDINE) Friuli 431.1250/432.7250 CC1
Receive Time:
1579341650
Latest Status:
https://brandmeister.network/?page=repeater&id=222333
Receive Time:
(Received in latest packet)
Latest Position4:
46.2365, 13.2435
Receive Time:
1579341650
 
Locator5:
Nearby locations:
Gemona , Italy 6.34 miles
Tavagnacco , Italy 8.81 miles
Udine , Italy 11.56 miles
Cervignano del Friuli , Italy 29.08 miles
Latest PHG6:
Power 9 W, Height 489 ft, Gain 3 dB omni
(Calculated range: 30.47 miles)
Packet frequency:
1620s (Latest 10 packets)
Latest symbol
Search for IR3UII at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in Gemona!

(Link to www.cwopviewer.com)

 
Nearby stations/objects:
Symbol  IR3EO 14 yd
Symbol  IV3SRD-10 25 yd
Symbol  IR3EF C 25 yd
Symbol  IR3EF-C 25 yd
Symbol  IW3RPW-9 7.6 miles
Symbol  IV3SRD-12 9.47 miles
Symbol  IV3EVJ-H0 11.01 miles
Symbol  IQ3UD 11.54 miles
Symbol  IV3ZNK-9 12.35 miles
Symbol  IV3IDP 12.36 miles
Symbol  IR3UBZ AD 12.37 miles
Symbol  IR3UBZ-B 12.37 miles
Symbol  IR3UBZ B 12.37 miles
Symbol  CW2103 13.72 miles
Symbol  DW6145 14.32 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position
Ruler