Name:
UB5MBG
Source1:
Symbol:
Latest symbol  TBD
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APBM1S via TCPIP*,qAS,RK3FWD-11
Device3:
Unknown
Latest Comment:
Privet ))) 434.6000/434.6000 CC1
Receive Time:
(Received in latest packet)
Latest Position4:
50, -3
Receive Time:
(Received in latest packet)
 
Locator5:
Nearby locations:
Brixham , United Kingdom 35.53 miles
Sidmouth , United Kingdom 48.89 miles
Bridport , United Kingdom 51.8 miles
Chard , United Kingdom 60.31 miles
Latest PHG6:
Power 16 W, Height 10 ft, Gain 0 dB omni
(Calculated range: 4.23 miles)
Packet frequency:
2315s (Latest 7 packets)
Latest symbol
Search for UB5MBG at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in Brixham!

(Link to www.cwopviewer.com)

 
Nearby stations/objects:
Symbol  EA3DB-B 0 yd
Symbol  EA3DB B 0 yd
Symbol  SP9APJ-N 0 yd
Symbol  K9DJN B 0 yd
Symbol  K9DJN-B 0 yd
Symbol  WI1N B 0 yd
Symbol  WI1N-B 0 yd
Symbol  BG0ARL-N 0 yd
Symbol  BI1LUK B 0 yd
Symbol  BI1LUK-B 0 yd
Symbol  2E0ETC-N 0 yd
Symbol  BD4TPA-N 0 yd
Symbol  BG1VOX-N 0 yd
Symbol  KB3RBK-N 0 yd
Symbol  DW6DKY-N 0 yd
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position
Ruler