Name:
AC9CO-10
Source1:
Symbol:
Latest symbol  Antenna
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APRS via TCPIP*,qAC,T2QUEBEC
Device3:
Unknown
Latest Comment:
Cross-Band Repeater (446.275 MHz/145.630 MHz CTCSS 141.3 Hz) with AllStar Link and EchoLink Nodes
Receive Time:
(Received in latest packet)
Latest Position4:
41.8751666666667, -87.8025
Receive Time:
(Received in latest packet)
 
Locator5:
Nearby locations:
Forest Park , United States 0.65 miles
Oak Park , United States 1.15 miles
River Forest , United States 1.67 miles
Berwyn , United States 1.76 miles
Latest PHG6:
Power 16 W, Height 20 ft, Gain 3 dB omni
(Calculated range: 7.11 miles)
Packet frequency:
540s (Latest 10 packets)
Latest symbol
Search for AC9CO at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in Forest Park!

(Link to www.cwopviewer.com)

 
Nearby stations/objects:
Symbol  KC9YJP C 1.32 miles
Symbol  KC9YJP-N 1.32 miles
Symbol  KC9YJP-C 1.32 miles
Symbol  FW4219 2.09 miles
Symbol  N9QIY-N 3.39 miles
Symbol  KD9JBT-N 4.33 miles
Symbol  KD9JBT E 4.33 miles
Symbol  KD9JBT-E 4.33 miles
Symbol  WA9SGF-2 4.4 miles
Symbol  FW7086 4.97 miles
Symbol  FW4705 5.81 miles
Symbol  AB9FX 6.63 miles
Symbol  KC9MNL-B 7.25 miles
Symbol  KC9MNL B 7.25 miles
Symbol  EW0592 7.35 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position
Ruler