Name:
PI1ETL
Source1:
Symbol:
Latest symbol  Digipeater
Latest Packet:
Telemetry Packet
Receive Time:
Age:
Path2:
APMI06 via TCPIP*,qAC,EIGHTH
Device3:
Unknown by Microsat
Latest Forwarded:
Receive Time:
1590624296
Latest Comment:
VHF - UHF Digi & Gateway Etten-Leur / JO21HN U=13.6V,T=30.0C
Receive Time:
1590624461
Latest Beacon:
rejUIV32N}
Receive Time:
1569867952
Latest Telemetry:
1590624515
Latest Position4:
51.5756666666667, 4.64516666666667
Receive Time:
1590624461
 
Locator5:
Nearby locations:
Prinsenbeek , Netherlands 3.29 miles
Breda , Netherlands 5.67 miles
Hoge Vucht , Netherlands 6.66 miles
Roosendaal , Netherlands 8.33 miles
Latest PHG6:
Power 25 W, Height 39 ft, Gain 7 dB omni
(Calculated range: 14.15 miles)
Packet frequency:
100s (Latest 3 packets)
Latest symbol
Search for PI1ETL at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in Prinsenbeek!

(Link to www.cwopviewer.com)

 
Nearby stations/objects:
Symbol  PI1ETL-10 0 yd
Symbol  PA5MB-13 33 yd
Symbol  DW8604 4.42 miles
Symbol  PI1HWB-B 5.05 miles
Symbol  PI1HWB B 5.05 miles
Symbol  PD4AJM B 5.32 miles
Symbol  PD4AJM-B 5.32 miles
Symbol  PE1OUH B 5.67 miles
Symbol  PE1OUH-B 5.67 miles
Symbol  PD1AEU 6.7 miles
Symbol  PS-PD1AEU 6.7 miles
Symbol  FW6263 6.74 miles
Symbol  EW7528 7.54 miles
Symbol  PI2BRD 7.78 miles
Symbol  PA7FRN-10 8.25 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position
Ruler