Name:
PE1PBA-2
Source1:
Symbol:
Latest symbol  Digipeater (New n-N Paradigm digi)
Latest Packet:
Status Packet
Receive Time:
Age:
Path2:
ID via PE1OEZ-2*,qAR,PE1OEZ-12
Device3:
Unknown
Latest Comment:
W2,NL4 DIGI_NED 4.0.1 (oez) : linux Raspberry pi Den helder
Receive Time:
1555836599
Latest Status:
DIGI_NED 0.4.0.1 (OEZ): Trumbleweed : PE1PBA in Den Helder
Receive Time:
(Received in latest packet)
Latest Position4:
52.9536666666667, 4.766
Receive Time:
1555836599
 
Locator5:
Nearby locations:
Den Helder , Netherlands 900 yd
Breezand , Netherlands 4.68 miles
Den Burg , Netherlands 7.06 miles
't Zand , Netherlands 8.1 miles
Latest PHG6:
Power 4 W, Height 20 ft, Gain 1 dB omni
(Calculated range: 4.48 miles)
Packet frequency:
479s (Latest 5 packets)
Latest symbol
Search for PE1PBA at QRZ.COM!

(Link to www.qrz.com)

 
Nearby stations/objects:
Symbol  PE0S-10 586 yd
Symbol  PD1LVK B  (PD1LVK-S) 4.28 miles
Symbol  PD1LVK-B 4.28 miles
Symbol  CW5771 9.32 miles
Symbol  PA0SMY 12.24 miles
Symbol  CW4745 14.95 miles
Symbol  PI1FRI-3 16.17 miles
Symbol  EW7806 16.79 miles
Symbol  PD0HF 17.38 miles
Symbol  PA2JZ-6 17.61 miles
Symbol  EW1985 20.95 miles
Symbol  PA1MP 21.46 miles
Symbol  CW1880 21.93 miles
Symbol  PA0JAD-B 22.45 miles
Symbol  PA0JAD B  (PA0JAD-S) 22.45 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position
Ruler
PHG

© 2015-2019 Per Qvarforth SM4WJF
All Rights Reserved

In this tab we show all APRS packets of any packet type that has been added to the map.

In this tab we show APRS packets of type position that has been added to the map (note that any station may send a position packet).

In this tab we show all APRS packets of type object or item that has been added to the map.

In this tab we show APRS packets of type weather that has been added to the map (note that any station may send a weather packet, not only weather stations).

In this tab we show APRS packets of type direction finding, telemetry, message, query and status that has been added to the map.

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

APRS Direct


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching