Name:
IW2ECM-H6
Source1:
Symbol:
Latest symbol  TBD
Latest Packet:
Status Packet
Receive Time:
Age:
Path2:
APBM1S via TCPIP*,qAS,BM2222
Device3:
Unknown
Latest Comment:
BM2222 - MMDVM Unknown 431.0500/431.0500 CC1
Receive Time:
1579300275
Latest Status:
https://brandmeister.network/?page=repeater&id=222213606
Receive Time:
(Received in latest packet)
Latest Position4:
45.4768333333333, 9.22666666666667
Receive Time:
1579300275
 
Locator5:
Nearby locations:
Milan , Italy 2 miles
Segrate , Italy 3.61 miles
Sesto San Giovanni , Italy 3.9 miles
Cinisello Balsamo , Italy 5.65 miles
Latest PHG6:
Power 1 W, Height 10 ft, Gain 1 dB omni
(Calculated range: 2.24 miles)
Packet frequency:
1620s (Latest 10 packets)
Latest symbol
Search for IW2ECM at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in Milan!

(Link to www.cwopviewer.com)

 
Nearby stations/objects:
Symbol  PS-IW2HOG 687 yd
Symbol  IK2GXE 1.07 miles
Symbol  IU2CIQ-R1 1.35 miles
Symbol  IR2AL 1.35 miles
Symbol  IK2ILW-3 2.06 miles
Symbol  PS-IW2HGL 2.87 miles
Symbol  IZ2ZRJ-ND 2.94 miles
Symbol  PS-IK2WQH 3.46 miles
Symbol  I2NOY-3 3.66 miles
Symbol  IU2ACH-H1 3.83 miles
Symbol  EW1380 4.8 miles
Symbol  I2AMH-11 5.63 miles
Symbol  IZ2ZRJ-H2 5.79 miles
Symbol  IZ2HVL-5 5.82 miles
Symbol  IR2UGD 6.29 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position
Ruler