Name:
MB7RAG
Source1:
Symbol:

Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APX204 via TCPIP*,qAC,T2LONDON
Device3:
Xastir (software, Linux/Unix) by Open Source
Latest Forwarded:
Receive Time:
1618773738
Latest Comment:
RX-IGATE_XASTIR_Raspberry-Pi-2b_TNC
Receive Time:
(Received in latest packet)
Latest Beacon:
?APRSD
Receive Time:
1613065305
Latest Position4:
51.7425, -0.9665
Receive Time:
(Received in latest packet)
Locator5:
Nearby locations:
Thame , United Kingdom
1026 yd
Aylesbury , United Kingdom 8.27 miles
Cowley , United Kingdom 10.29 miles
Henley-on-Thames , United Kingdom 14.73 miles
Aylesbury , United Kingdom 8.27 miles
Cowley , United Kingdom 10.29 miles
Henley-on-Thames , United Kingdom 14.73 miles
Latest PHG6:
Power 4 W, Height 20 ft, Gain 6 dB omni
(Calculated range: 5.97 miles)
(Calculated range: 5.97 miles)

Search for MB7RAG at QRZ.COM!
Check out current
weather in Thame!
(Link to www.qrz.com)
Check out current
weather in Thame!
(Link to www.cwopviewer.com)
Nearby stations/objects:
- A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
- To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
- Used Aprs Device according to the APRS device identification database.
- Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
- This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
- PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.