Name:
N3PUU-1
Source1:
APRS-IS
Symbol:
Latest symbol  TX Igate (with path set to 1 hop)
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APDW16 via CLAYTN,WIDE1*,WIDE2-1,qAR,N2SRO
Device3:
DireWolf by WB2OSZ
Latest Forwarded:
K2EOC-10
Receive Time:
1627786686
Latest Comment:
Sicklerville, NJ Direwolf IGate/Fill-In Digi
Receive Time:
(Received in latest packet)
Latest Position4:
39.7295, -74.9948333333333
Receive Time:
(Received in latest packet)
 
Locator5:
Nearby locations:
Sicklerville , United States 1.59 miles
Williamstown , United States 2.99 miles
Pine Hill , United States 3.79 miles
Lindenwold , United States 6.55 miles
Latest PHG6:
Power 16 W, Height 20 ft, Gain 4 dB omni
(Calculated range: 7.53 miles)
Latest symbol
Search for N3PUU at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in Sicklerville!

(Link to www.cwopviewer.com)

 
Nearby stations/objects:
Symbol  CW5775 1.91 miles
Symbol  DW9082 3.48 miles
Symbol  EW0923 3.6 miles
Symbol  KB2M-2 5.02 miles
Symbol  FW7863 5.17 miles
Symbol  CLAYTN 6.62 miles
Symbol  N2ASU-D 7.31 miles
Symbol  KC2YCY-B 7.31 miles
Symbol  KC2YCY B 7.31 miles
Symbol  N2ASU-N 7.31 miles
Symbol  N2ASU-B 7.31 miles
Symbol  N2ASU B 7.31 miles
Symbol  KD2RGH-N 7.34 miles
Symbol  DW4067 7.55 miles
Symbol  CW4621 8.59 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
© 2015-2021 Per Qvarforth. All Rights Reserved.
Initial position
Current position
Ruler