Name:
LU3EGR-1
Source1:
Symbol:
Latest symbol  Digipeater (digipeater is also an IGate)
Latest Packet:
Message Packet
Receive Time:
Age:
Path2:
APRX29 via TCPIP*,qAC,T2DENMARK
Device3:
Aprx (software, Linux/Unix) by Kenneth W. Finnegan, W6KWF
Latest Forwarded:
Receive Time:
1591409249
Latest Comment:
Digipeater - IGate (Rx)
Receive Time:
1591408187
Latest Telemetry:
1591409113
Latest Position4:
-34.9091666666667, -57.9503333333333
Receive Time:
1591408187
 
Locator5:
Nearby locations:
La Plata , Argentina 0.88 miles
Berazategui , Argentina 17.9 miles
Quilmes , Argentina 21.7 miles
Adrogué , Argentina 25.7 miles
Latest PHG6:
Power 4 W, Height 89 ft, Gain 8 dB omni
(Calculated range: 14.22 miles)
Packet frequency:
1232s (Latest 5 packets)
Latest symbol
Search for LU3EGR at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in La Plata!

(Link to www.cwopviewer.com)

 
Nearby stations/objects:
Symbol  LU4ECL 0.88 miles
Symbol  LU4DRC-H0 1.61 miles
Symbol  436250KHz 3.22 miles
Symbol  LU8DQ B 8.11 miles
Symbol  LU8DQ-B 8.11 miles
Symbol  LU4DQ-1 20.55 miles
Symbol  LU4DQ-L 20.62 miles
Symbol  LW4DBE 20.96 miles
Symbol  LW4DBE-15 20.97 miles
Symbol  LW4DBE-1 20.97 miles
Symbol  LW4DBE-2 23.49 miles
Symbol  ER-LU3DY 25.47 miles
Symbol  LU7DID-H0 25.82 miles
Symbol  EL-LU9DPS 26.81 miles
Symbol  LU4DCL-1 28.73 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position
Ruler