Name:
KC8RFE-2
Source1:
Symbol:
Latest symbol  Digipeater (digipeater is also an IGate)
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APX200 via TCPIP*,qAC,FIRST
Device3:
Xastir (software, Linux/Unix) by Open Source
Latest Comment:
XASTIR-Linux
Receive Time:
(Received in latest packet)
Latest Position4:
40.323, -88.1438333333333
Receive Time:
(Received in latest packet)
Locator5:
Nearby locations:
Rantoul, United States 1.92 km
Thomasboro, United States 9.67 km
Gifford, United States 10.57 km
Paxton, United States 15.81 km
Latest PHG6:
Power 4 W, Height 3 m, Gain 2 dB omni
(Calculated range: 5.4 km)
Packet frequency:
1575s (Latest 8 packets)
 
 
Related stations/objects7:
Nearby stations/objects:
Symbol  WA9RES 17.23 km
Symbol  CW2101 21.79 km
Symbol  CCRCC 22.66 km
Symbol  EW8817 22.9 km
Symbol  DW9614 23.68 km
Symbol  W9IPA-B 24.13 km
Symbol  KD9GBT-B 24.22 km
Symbol  KD9GBT B  (KD9GBT-S) 24.22 km
Symbol  EW6138 24.48 km
Symbol  WA9RES-10  (WINLINK) 24.49 km
Symbol  KA9VRA-10  (WINLINK) 25.4 km
Symbol  K9SI 25.56 km
Symbol  DW6125 27.21 km
Symbol  FW0668 27.72 km
Symbol  EW8630 29.12 km
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
  7. If station has more than 30 related stations we will only show the 30 closest related stations.
Initial position
Current position
Ruler
PHG

© 2015-2017 Per Qvarforth SM4WJF
All Rights Reserved
Here you can change how long time a station should be visible.

In this tab we show all APRS packets of any packet type that has been added to the map.

In this tab we show APRS packets of type position that has been added to the map (note that any station may send a position packet).

In this tab we show all APRS packets of type object or item that has been added to the map.

In this tab we show APRS packets of type weather that has been added to the map (note that any station may send a weather packet, not only weather stations).

In this tab we show APRS packets of type direction finding, telemetry, message, query and status that has been added to the map.

 

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

APRS Direct


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching