Latest symbol  Digipeater (WIDEn-N and relay,wide,trace)
Latest Packet:
Position Packet
Receive Time:
KPC-3 by Kantronics
Latest Forwarded:
Receive Time:
Latest Comment:
Receive Time:
(Received in latest packet)
Latest Position4:
35.1575, -93.6866666666667
Receive Time:
(Received in latest packet)
Nearby locations:
Russellville , United States 32.31 miles
Van Buren , United States 42 miles
Fort Smith , United States 43.14 miles
Hot Springs Village , United States 51.42 miles
Latest PHG6:
Power 25 W, Height 489 ft, Gain 6 dB omni
(Calculated range: 46.76 miles)
Packet frequency:
600s (Latest 10 packets)
Latest symbol

Check out current
weather in Russellville!

(Link to

Nearby stations/objects:
Symbol  FW9143 13.89 miles
Symbol  EW1127 22.75 miles
Symbol  CW4407 24.2 miles
Symbol  K5CS-1 24.85 miles
Symbol  N5OSI 31.51 miles
Symbol  KI5JQW B 33.21 miles
Symbol  KI5JQW-B 33.21 miles
Symbol  KRUE 33.73 miles
Symbol  FW0798 39.27 miles
Symbol  KFSM 40.25 miles
Symbol  FW8395 40.72 miles
Symbol  KMWT 42.38 miles
Symbol  CW1842 42.99 miles
Symbol  146.715 46.72 miles
Symbol  MTIDA 47.54 miles

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position