Name:
IT9HLC-R0
Source1:
Symbol:
Latest symbol  Antenna
Latest Packet:
Unknown Packet
Sender:
Receive Time:
Age:
Latest Comment:
BM2222 - Slot 1 TG222111 DMR BM - Slot 2 TG22291 Sicilia DMR+ M.te Pecoraro Cinisi - https://is.gd/eFNgEu 430.8625/435.8625 CC2
Receive Time:
1632072668
Latest Status:
https://brandmeister.network/?page=repeater&id=222911
Receive Time:
(Received in latest packet)
Latest Position2:
38.164, 13.127
Receive Time:
1632072668
 
Locator3:
Nearby locations:
Cinisi , Italy 1.43 miles
Carini , Italy 3.73 miles
Partinico , Italy 8.13 miles
Palermo , Italy 11.55 miles
Latest PHG4:
Power 9 W, Height 10 ft, Gain 5 dB omni
(Calculated range: 4.88 miles)
Latest symbol
Search for IT9HLC at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in Cinisi!

(Link to www.cwopviewer.com)

 
Related stations/objects5:
Nearby stations/objects:
Symbol  IT9BGI-L 283 yd
Symbol  IT9BGI-10 2.87 miles
Symbol  IT9BGI-8 2.93 miles
Symbol  IR9BV 3.12 miles
Symbol  EL-IR9UBW 3.16 miles
Symbol  IZ0LWN-H0 3.74 miles
Symbol  IT9FKM-D 4.42 miles
Symbol  IT9FKM-H0 4.42 miles
Symbol  IW9BGV-9 5.49 miles
Symbol  IT9CIF-R1 6.03 miles
Symbol  IT9CIF-R 6.03 miles
Symbol  IT9FNG-R2 6.39 miles
Symbol  IT9SIF-H0 7.56 miles
Symbol  IT9SIF C 7.56 miles
Symbol  IT9SIF-C 7.56 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  3. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  4. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
  5. If station has more than 30 related stations we will only show the 30 closest related stations.
Initial position
Current position
Ruler