Name:
OK1OQH-2
Source1:
Symbol:
Latest symbol  Digipeater (Fill-in digi, 1-hop limit)
Latest Packet:
Other Packet
Receive Time:
Age:
Path2:
UIDIGI via qAR,OK0BCA-1
Device3:
Unknown
Latest Forwarded:
Receive Time:
1597162669
Latest Comment:
Lichovy-Sedlcany
Receive Time:
1597288048
Latest Status:
SysOp: p39 (at) seznam.cz
Receive Time:
1597288774
Latest Position4:
49.6703333333333, 14.3251666666667
Receive Time:
1597288048
 
Locator5:
Nearby locations:
Příbram , Czechia 14.13 miles
Benešov , Czechia 17.89 miles
Modřany , Czechia 23.85 miles
Braník , Czechia 25.51 miles
Latest PHG6:
Power 4 W, Height 39 ft, Gain 3 dB omni
(Calculated range: 7.11 miles)
Packet frequency:
1200s (Latest 6 packets)
Latest symbol
Search for OK1OQH at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in Příbram!

(Link to www.cwopviewer.com)

 
Nearby stations/objects:
Symbol  OK1VCF-5 5.55 miles
Symbol  OK1KQH-6 9.1 miles
Symbol  EL-OK1BY 9.64 miles
Symbol  OK0BNJ-2 10.12 miles
Symbol  OK1LPD-1 10.12 miles
Symbol  ER-OK0MM 10.15 miles
Symbol  ER-OK0BNJ 10.16 miles
Symbol  EW9317 10.62 miles
Symbol  OK4PZ-2 11.34 miles
Symbol  OK1LPD-3 12.01 miles
Symbol  438.625ST 16.63 miles
Symbol  OK0BNH-2 16.67 miles
Symbol  OK0BNH-ND 16.82 miles
Symbol  ER-OK0BNH 16.98 miles
Symbol  OK1FET-4 18.5 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position
Ruler