Name:
G4MUV-0
Source1:
Symbol:
Latest symbol  Antenna
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APRS via TCPIP*,qAC,T2LONDON
Device3:
Unknown
Latest Comment:
0/MB7AUV Allstar Internet Gateway 430.050 MHZ 103.5 CTCSS / HubNet UK
Receive Time:
(Received in latest packet)
Latest Position4:
52.2963333333333, -1.884
Receive Time:
(Received in latest packet)
Locator5:
Nearby locations:
Studley, United Kingdom 2.95 km
Redditch, United Kingdom 4.34 km
Astwood Bank, United Kingdom 5.45 km
Alcester, United Kingdom 8.94 km
Latest PHG6:
Power 16 W, Height 12 m, Gain 0 dB South East
(Calculated range: 13.61 km)
Packet frequency:
545s (Latest 11 packets)
 
 
Nearby stations/objects:
Symbol  CW5111 12.55 km
Symbol  CW2305 14.76 km
Symbol  M6FQQ-WX 14.76 km
Symbol  EW4914 15.97 km
Symbol  GB7BM B  (GB7BM-S) 18.72 km
Symbol  GB7BM-R 18.72 km
Symbol  2E0XTV B  (2E0XTV-S) 19.05 km
Symbol  2E0XTV-B 19.05 km
Symbol  G1KEA-C 22 km
Symbol  G1KEA C  (G1KEA-S) 22 km
Symbol  EW5670 23.08 km
Symbol  M3ZID B  (M3ZID-S) 23.83 km
Symbol  M3ZID-B 23.83 km
Symbol  G8IMN-B 31.43 km
Symbol  G8IMN B  (G8IMN-S) 31.43 km
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
Initial position
Current position
Ruler
PHG

© 2015-2017 Per Qvarforth SM4WJF
All Rights Reserved
Here you can change how long time a station should be visible.

In this tab we show all APRS packets of any packet type that has been added to the map.

In this tab we show APRS packets of type position that has been added to the map (note that any station may send a position packet).

In this tab we show all APRS packets of type object or item that has been added to the map.

In this tab we show APRS packets of type weather that has been added to the map (note that any station may send a weather packet, not only weather stations).

In this tab we show APRS packets of type direction finding, telemetry, message, query and status that has been added to the map.

 

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

APRS Direct


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching