Name:
SR1NRW
Source1:
Symbol:
Latest symbol  Digipeater (with overlay 2)
Latest Packet:
Position Packet
Receive Time:
Age:
Path2:
APMI06 via WIDE2-1,qAR,R2WXCZ
Device3:
Unknown by Microsat
Latest Forwarded:
Receive Time:
1624119885
Latest Comment:
W2, SPn digi Walcz, op. SQ1GQN
Receive Time:
(Received in latest packet)
Latest Position4:
53.2793333333333, 16.4828333333333
Receive Time:
(Received in latest packet)
 
Locator5:
Nearby locations:
Wałcz , Poland 863 yd
Piła , Poland 13.76 miles
Trzcianka , Poland 16.53 miles
Czarnków , Poland 26.28 miles
Latest PHG6:
Power 9 W, Height 89 ft, Gain 6 dB omni
(Calculated range: 15.52 miles)
Latest used symbols:
Symbol  Symbol 
Packet frequency:
524s (Latest 12 packets)
Latest symbol
Search for SR1NRW at QRZ.COM!

(Link to www.qrz.com)


Check out current
weather in Wałcz!

(Link to www.cwopviewer.com)

 
Related stations/objects7:
Nearby stations/objects:
Symbol  439.400-W 43 yd
Symbol  SP3TUT-9 1.37 miles
Symbol  SP3KLZ 12.96 miles
Symbol  SP3WXH-10 13.05 miles
Symbol  439.050PI 13.3 miles
Symbol  145.687PI 13.3 miles
Symbol  SQ3BKH-7 13.31 miles
Symbol  SR3DPI 14.47 miles
Symbol  SQ2SA-14 14.61 miles
Symbol  SQ3KNR-9 14.83 miles
Symbol  SP3TUT-15 16.3 miles
Symbol  438.7125C 21.43 miles
Symbol  SQ1KUI-15 26.58 miles
Symbol  SP3EOL-1 26.82 miles
Symbol  SQ3EYR-10 31.34 miles
 

  1. A packet is either recived from the regular APRS-IS servers or from the CWOP servers. Packets received from the APRS-IS servers are sent from ham radio operators, and packets received from the CWOP servers are sent from citizen weather stations.
  2. To get a better understanding of the APRS path I recommend reading the explanation written by wa8lmf.
  3. Used Aprs Device according to the APRS device identification database.
  4. Position accordning to the Google geocoding service, based on the reported latitude and longitude (if we get no valid position from the Google gecoding service we will show the latitude and longitude).
  5. This is the Maidenhead Grid Square Locator, used by ham radio operators to specify a location (using few characters).
  6. PHG stands for Power-Height-Gain (and directivity). The height is not the height above sea-level, it is the height above average terrain (HAAT = Height Above Average Terrain). PHG is used to calculate the relative RF range of a station. If this station has reported several positions or symbols the PHG data will only be used for the position and symbol used in the PHG-packet.
  7. If station has more than 30 related stations we will only show the 30 closest related stations.
Initial position
Current position
Ruler