Show chart for

* All the dates and times in chart are based on the timezone on your computer.

 

The latest received telemetry analog values.

Time Vin* Rx1h* Dg1h* Eff1h* EffTL*
1619145944 15.72 Volt 330 Pkt 50 Pkt 57 pcnt 60 pcnt
1619146244 15.72 Volt 320 Pkt 50 Pkt 57 pcnt 60 pcnt
1619146544 15.72 Volt 310 Pkt 50 Pkt 57 pcnt 60 pcnt
1619146844 15.72 Volt 300 Pkt 50 Pkt 55 pcnt 60 pcnt
1619147144 15.72 Volt 290 Pkt 50 Pkt 55 pcnt 60 pcnt
*Used Equation Coefficients:
Vin: 0, 0.079, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
EffTL: 0, 1, 0

The latest received telemetry bits.

Time R* A* Y* N* E* T* U* K*
1619146544
OPN
OPN
OPN
OPN
ON
ON
ON
ON
1619146844
OPN
OPN
OPN
OPN
ON
ON
ON
ON
1619147144
OPN
OPN
OPN
OPN
ON
ON
ON
ON
*Used Bit Sense:
1 1 1 1 1 1 1 1

  • Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)
© 2015-2021 Per Qvarforth. All Rights Reserved.
Initial position
Current position
Ruler