Show chart for

* All the dates and times in chart are based on the timezone on your computer.

 

The latest received telemetry analog values.

Time Vin* Rx1h* Dg1h* Eff1h* TempF*
1632617093 15.15 Volt 40 Pkt 10 Pkt 86 Pcnt 64.4 deg
1632617393 15.15 Volt 40 Pkt 10 Pkt 82 Pcnt 63.5 deg
1632617692 15.38 Volt 50 Pkt 10 Pkt 82 Pcnt 62.6 deg
1632617993 15.68 Volt 50 Pkt 10 Pkt 81 Pcnt 62.6 deg
1632618293 15.38 Volt 50 Pkt 10 Pkt 81 Pcnt 62.6 deg
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
TempF: 0, 0.9, -83.2

The latest received telemetry bits.

Time O1* O2* O3* O4* I1* I2* I3* I4*
1632617692
On
On
On
On
Hi
Hi
Hi
Hi
1632617993
On
On
On
On
Hi
Hi
Hi
Hi
1632618293
On
On
On
On
Hi
Hi
Hi
Hi
*Used Bit Sense:
1 1 1 1 1 1 1 1

  • Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)
Initial position
Current position
Ruler