Show chart for

* All the dates and times in chart are based on the timezone on your computer.

 

The latest received telemetry analog values.

Time Vin* Rx1h* Dg1h* Eff1h* Eff*
1634662847 12.98 Volt 250 Pkt 80 Pkt 95 Pcnt 82 Pcnt
1634664048 12.98 Volt 270 Pkt 90 Pkt 94 Pcnt 82 Pcnt
1634665249 12.98 Volt 280 Pkt 90 Pkt 89 Pcnt 82 Pcnt
1634666450 12.98 Volt 270 Pkt 90 Pkt 89 Pcnt 82 Pcnt
1634667651 12.98 Volt 250 Pkt 90 Pkt 89 Pcnt 82 Pcnt
*Used Equation Coefficients:
Vin: 0, 0.075, 0
Rx1h: 0, 10, 0
Dg1h: 0, 10, 0
Eff1h: 0, 1, 0
Eff: 0, 1, 0

The latest received telemetry bits.

Time O1* O2* O3* O4* I1* I2* I3* I4*
1634665249
On
On
On
On
Hi
Hi
Hi
Hi
1634666450
On
On
On
On
Hi
Hi
Hi
Hi
1634667651
On
On
On
On
Hi
Hi
Hi
Hi
*Used Bit Sense:
1 1 1 1 1 1 1 1

  • Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)
Initial position
Current position
Ruler