Show chart for

* All the dates and times in chart are based on the timezone on your computer.

 

The latest received telemetry analog values.

Time RxTot* RxDir* RxTot* RxDir* TxTot*
1585906690 230 pkt/15m 17 pkt/15m 63 stn/15m 7 stn/15m 1 pkt/15m
1585907590 226 pkt/15m 14 pkt/15m 59 stn/15m 7 stn/15m 6 pkt/15m
1585908490 242 pkt/15m 20 pkt/15m 59 stn/15m 7 stn/15m 8 pkt/15m
1585909390 250 pkt/15m 18 pkt/15m 62 stn/15m 8 stn/15m 5 pkt/15m
1585910290 233 pkt/15m 17 pkt/15m 61 stn/15m 7 stn/15m 3 pkt/15m
*Used Equation Coefficients:
RxTot: 0, 1, 0
RxDir: 0, 1, 0
RxTot: 0, 1, 0
RxDir: 0, 1, 0
TxTot: 0, 1, 0

The latest received telemetry bits.

Time WEB* NWS* BOM* Bit4* Bit5* Bit6* Bit7* Bit8*
1585908490
on
off
off
1585909390
on
off
off
1585910290
on
off
off
*Used Bit Sense:
1 1 1 1 1 1 1 1

  • Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)
Initial position
Current position
Ruler