Show chart for

* All the dates and times in chart are based on the timezone on your computer.

 

The latest received telemetry analog values.

Time Avg 10m* Avg 10m* RxPkts* IGateDropRx* TxPkts*
1573506727 0 Rx Erlang 0 Tx Erlang 1 count/10m 0 count/10m 0 count/10m
1573507927 0 Rx Erlang 0 Tx Erlang 0 count/10m 0 count/10m 1 count/10m
1573509127 0 Rx Erlang 0 Tx Erlang 0 count/10m 0 count/10m 0 count/10m
1573510327 0 Rx Erlang 0 Tx Erlang 1 count/10m 0 count/10m 0 count/10m
1573511527 0 Rx Erlang 0 Tx Erlang 0 count/10m 0 count/10m 0 count/10m
*Used Equation Coefficients:
Avg 10m: 0, 0.005, 0
Avg 10m: 0, 0.005, 0
RxPkts: 0, 1, 0
IGateDropRx: 0, 1, 0
TxPkts: 0, 1, 0

The latest received telemetry bits.

Time Bit1* Bit2* Bit3* Bit4* Bit5* Bit6* Bit7* Bit8*
1573509127
1573510327
1573511527
*Used Bit Sense:
1 1 1 1 1 1 1 1

  • Telemetry packets is used to share measurements like repeteater parameters, battery voltage, radiation readings (or any other measurements).
  • The parameter names for the analog channels will be Value1, Value2, Value3 (up to Value5) if station has not sent a PARAM-packet that specifies the parameter names for each analog channel.
  • Each analog value is a decimal number between 000 and 255 (according to APRS specifications). The receiver use the telemetry equation coefficientsto to restore the original sensor values. If no EQNS-packet with equation coefficients is sent we will show the values as is (this corresponds to the equation coefficients a=0, b=1 and c=0).
    The sent equation coefficients is used in the equation: a * value2 + b * value + c.
  • The units for the analog values will not be shown if station has not sent a UNIT-packet specifying what unit's to use.
  • The parameter names for the digital bits will be Bit1, Bit2, Bit3 (up to Bit8) if station has not sent a PARAM-packet that specifies the parameter names for each digital bit.
  • All bit labels will be named "On" if station has not sent a UNIT-packet that specifies the label of each bit.
  • A bit is considered to be On when the bit is 1 if station has not sent a BITS-packet that specifies another "Bit sense" (a BITS-packet specify the state of the bits that match the BIT labels)
Initial position
Current position
Ruler
PHG

© 2015-2019 Per Qvarforth SM4WJF
All Rights Reserved

In this tab we show all APRS packets of any packet type that has been added to the map.

In this tab we show APRS packets of type position that has been added to the map (note that any station may send a position packet).

In this tab we show all APRS packets of type object or item that has been added to the map.

In this tab we show APRS packets of type weather that has been added to the map (note that any station may send a weather packet, not only weather stations).

In this tab we show APRS packets of type direction finding, telemetry, message, query and status that has been added to the map.

Select date and time to show map data for (enter time for your locale time zone). The regular time length select box can still be used to select how old data that should be shown (relative to selected date and time).

*Note that the heatmap will still based on data from the latest hour (not the selected date and time).

Date and time:

reset

APRS Direct


Current time is:


reset

Station filter


reset
Loading Loading
LocatingLocating
Searching Searching